Product Description:

Ready-to-use remover for unpainted, porous surfaces such as uncoated brick, concrete, block, aggregate, tile, sidewalks, restrooms and benches. Effective in removing paint, ink, markers and other unwanted substances from most surfaces. Use with a hot or cold pressure washer for larger surface removals. Can also be used to remove graffiti from surfaces coated with the GCP 1000 Top Coat.

Appearance: Clear with optional banana scent.

pH: 8.4

Dilution Ratio: Ready to use.

Shelf Life: 18 months, unopened when properly stored.

Storage: 45°F-70°F. Keep from freezing or prolonged exposure to sunlight and heat. Keep closed during storage.

Coverage Rate: Approximately 200 square feet per gallon, based upon application method and substrate.

Application Equipment: Soft bristle brush, Scotch- Brite pad or high pressure cold water machine.

Solubility in Water: Complete

Boiling Point @ 760 mm Hg: 212o F

Flash Point: >160o F

Carcinogens: None

VOC, FDA, EPA, CARB Compliant: Yes

Reactivity Data: Stable

Removal Instructions:

Apply Eaze Away Remover or Gold Remover to the affected area using a hand sprayer, brush or high pressure, cold water machine. Allow remover to remain on the surface for one to five minutes. Agitate with a brush or scrubber sponge to loosen all graffiti from the coating. Wipe off graffiti with a towel. Spray or hose the cleaned area with water to remove all loose traces of graffiti or coating. If using Graffiti Melt Coating, allow the surface to dry almost completely before re-applying the coating using the methods outlined on the container.

Packaging Info: