GCR 5s Series
Solvent-Borne Acrylic Finish
Product Description
The GCR 5 Pure Color Solvent Based Series is a 100% acrylic solvent-borne interior/exterior coating designed to provide the highest level of UV resistant and color retention for high and low humidity and temperature application conditions. GCR 5 Solvent Series is excellent for solid and creating multiple effects on various surfaces. Product features include:
- Highly Durable
- Corrosion Resistant
- Fast Drying
- VOC Compliant
- User friendly – brush, roll, spray
- Available in colors, pearls and metallics
Intended Uses:
- Architectural
- Theme & Scenic Applications
- Murals & Back Drops
- Transportation & Rail Cars
- Light Industrial
- Fiberglass, PVC, Steel
- Masonry, Aluminum
Product Characteristics
Resin Type: Acrylic Resin
Finishes: Available in the following sheens:
| GCR 5s High Gloss | 80% @ 60 ̊ |
|---|---|
| GCR 5s Semi-Gloss | 50% @ 60 ̊ |
| GCR 5s Satin | 20% @ 60 ̊ |
| GCR 5s Flat | >6% @ 60 ̊ |
Compatible Systems: GCR 47 primer, GCP 1000 Aliphatic Polyurethane, GCR 37 Polyurethane
Colors:
| Burnt Sienna | Medium Yellow | Raw Sienna |
|---|---|---|
| Burnt Umber | Medium Green | Raw Umber |
| Carbon Black | Moss Yellow | Shocking Green |
| Fire Orange | Permanent Red | Ultramarine Blue |
| Hansa Yellow | Pthalo Blue | Violet |
| Magenta | Pthalo Green | White |
Color Dispersions: 18 different dispersions
VOC: Coating: 450 g/L
Flash Point: Flammable
Solids by Volume: 42% (± 2)
Reducer: Optional - 2:1 with SO 345 Slow Reducer
Drying Schedule (3.0 mils wet - 50% RH):
| Temp/Humidity Dependent | 77°F | 110°F |
|---|---|---|
| To Touch | 20 minutes | 10 minutes |
| To Recoat | 1 hour | 40 minutes |
Shelf Life: 12 months, unopened @ 77°F. Re-inspect past one year.
Storage: 45°F-90°F . Keep from prolonged exposure to sunlight and heat. Keep closed during storage. KEEP FROM FREEZING. Take necessary precautions for transporting and storage to keep from freezing. If product does freeze, discard according to local, state and federal regulations.
Shipping Packaging Information
| Shipping Weight | Packaging |
|---|---|
| 1 gallon = 10 pounds | 4 gallons per case |
| 5 gallon = 36 pounds | 5 gallon pails are not boxed |
This product is classified as Shipping Class 55
Contact Information
For current information, job specs, warranties, or other questions not covered in this data sheet, contact:
Genesis Coatings, Inc. (800) 533-4273.
ASTM Test Results
ASTM Test Results:
Substrate - Steel
Preparation - SSPC-SP10
2 Coats - GCR 5s High Gloss Acrylic Solvent-Borne
Abrasion: ASTM D4060
(CS17 wheel/1000 cycles/ 1kg load) Result = 107 mg loss
Adhesion: ASTM D4541 = 500 psi
Direct Impact Resistance: ASTM D2794 = >160 in. lbs.
Dry Heat Resistance: ASTM DD2485 = 300°F
Flame Spread Rating: ASTM E84-91A / ASTM E162 Result: Flame Index Spread = 5, Smoke Density Index = 0
Flexibility: ASTM D522 (180° bend, 1/8” mandrel) = Pass
Hardness: ASTM D3363 = 2B
Moisture Condensation Resistance: ASTM D4585 Result: 100°F, 300 Hours = Passes
Salt Spray: ASTM B117 (500 hours) = Excellent
Smoke Emissions: ASTM E662 Flaming/Non-Flaming
@ 1.5 = 0; Flaming @ 4= 11; Non-Flaming = 2 Comparable to products formulated to Federal Specification: Mil-P-28578B, anTT-P-1511B & Paint Specification: SSPC-Paint 24
See additional Information for chemical resistance.
Theoretical Coverage Rates
The following coverage rates are for estimation purposes only. To accurately determine coverage rates, apply a test application on the actual surface. Surface porosity and texture, method of application and climate conditions affect application rates:
| Substrate | Sq/Ft per Gallon |
|---|---|
| Concrete | 250 |
| Masonry | 250 |
| Metal, Steel | 450 |
| Fiberglass, GRP | 400 |
Limitations
Do not apply product in rain, high humidity or wind. The information provided is to be used as a guideline only.
Specific jobs may require additional information. Please contact your Sales Representative or GCR Representative for further information.