Product Description

GCR-473 Primer Filler is a two component solvent based primer filler. It has good adhesion over a variety of substrates including phenolic and epoxy composite, aluminum, polycarbonate, ABS and Kydex. Characteristics include quick dry time, while maintaining a long gel time. It is compatible with a lot of Genesis base coat and topcoat series.

GCR-473 Primer Filler is formulated to meet the SCAQMD’s VOC requirements for primer coatings.

Intended Uses:

• Aerospace
• Transportation
• Sporting goods
• Telecommunication products
• Interior automotive
  

Product Characteristics

Gloss: <10

Weight per Gallon: 13.06 lb/gal

Colors: Custom colors available

Pot Life: 2 hours

Gel time: >24 hours

Volume Solids: 40%  (mixed 100:10:20 by weight)

Mixed Viscosity: 20-25 seconds #2 EZ Zahn cup 75oF

Cross-Hatch: No loss

VOC: Coating: 305 g/l Mixed: 250 g/l

Dry Film Thickness: 1.5-2.5 mils

Dry Time & Cure Schedules:

Surface Preparation and Application Highlights

See application instructions for complete detail.

Surface Preparation:

All surfaces should be thoroughly clean.

Mixing Ratio (by weight):

10 parts G-Series Activator

20 parts SO-575 Reducer

100 parts GCR-473 Primer Filler

Application:

Spray with conventional or HVLP spray gun to achieve 1.5-2.5 mils.

Product System Options / Compatibility

GCP-5000 Series – Genesis solid color base coat

GCR-37MT Series – Genesis metallic colors

GCR-37B Series – Genesis solid color top coat

Available in Gloss (>80), Semi-gloss (50), Satin (25), Flat (<5)

GCR-37B-C5M1 – Clear gloss top coat

GCP-3001 – Genesis Soft Touch top coat

Theoretical Coverage Rates

Spread rate is dependent on application method, substrate and anticipated level of use. Below figures are for estimation purposes only. Testing should be completed for accurate figures. Application loss factor is not covered due to surface profile, porosity, application technique, surface irregularities, spillage, climatic conditions or film build:

Spread @ 1 mil - 650 square feet

100% transfer efficiency

Storage

Store unopened at 45°F - 90°F.

Keep from freezing or prolonged exposure to sunlight and heat.

Packaging

1 gallon GCR-473 Primer Filler

1 quart SO-575 Reducer

1 pint G-Series Activator

This product is shipped as Class 55 flammable.

Contact Information

Technical questions or warranty issues, please contact:

GENESIS COATINGS (800) 533-4273

Refer to the Application Instructions and Material Safety Data Sheet for more detailed information.