GCR-472B is a two component solvent based primer.
It has good adhesion over a variety of substrates including phenolic and epoxy composite, aluminum, polycarbonate, ABS and Kydex. Characteristics include quick dry time, while maintaining a long gel time. It is compatible with a lot of Genesis base coat and topcoat series.
GCR-472B is formulated to meet the SCAQMD’s VOC requirements for primer coatings.
Intended Uses:
Gloss: <10
Weight per Gallon: 13.06 lb/gal
Colors: Custom colors available
Pot Life: 2 hours
Gel time: >24 hours
Volume Solids: 40%
Mixed Viscosity: 20-25 seconds #2 EZ Zahn cup 75oF
Cross-Hatch: No loss
VOC: Coating: 305 g/l Mixed: 250 g/l
Dry Film Thickness: 1.5-2.5 mils
Dry Time & Cure Schedules:
Dry to Handle: | 30 mins | @ 150°F |
---|---|---|
Dry to Recoat: | 30 mins | @ 150°F |
Tack Free: | 90 mins | @ 77°F (RT) |
See application instructions for complete detail.
Surface Preparation:
All surfaces should be thoroughly clean.
Mixing Ratio (by weight):
10 grams G-Series Activator
20 grams SO-575 Reducer
100 grams GCR-472B Primer
Application:
Spray with conventional or HVLP spray gun to achieve 1.5-2.5 mils.
GCP-5000 Series – Genesis solid color base coat
GCR-37MT Series – Genesis metallic colors
GCR-37B Series – Genesis solid color top coat
Available in Gloss (>80), Semi-gloss (50), Satin (25), Flat (<5)
GCR-37B-C5M1 – Clear gloss top coat
GCP-3001 – Genesis Soft Touch top coat
Spread rate is dependent on application method, substrate and anticipated level of use. Below figures are for estimation purposes only. Testing should be completed for accurate figures. Application loss factor is not covered due to surface profile, porosity, application technique, surface irregularities, spillage, climatic conditions or film build:
Spread @ 1 mil - 650 square feet
100% transfer efficiency
Store unopened at 45°F - 90°F.
Keep from freezing or prolonged exposure to sunlight and heat.
1 gallon GCR-472B Primer
1 quart SO-575 Reducer
1 pint G-Series Activator
This product is shipped as Class 55 flammable.
Technical questions or warranty issues, please contact:
GENESIS COATINGS (800) 533-4273
Refer to the Application Instructions and Material Safety Data Sheet for more detailed information.
© 2020 All Rights Reserved | Genesis Coatings | Website Design by GoBeRewarded