GCR 1
Floor Stripper
GCR 1-2-3 Floor System is Patent Pending
Product Description
GCR 1 Floor Stripper is a ready to use floor stripper designed to reduce time and labor by quickly removing floor finishes, dirt, grime, oil, stains, tar, gums, adhesives and scuffmarks.
- Water-soluble
- Low-sudsing
- Homogenous
- Uniform consistency
- Use with soft or hard water
- Contains no abrasives
Intended Uses:
- Vinyl Composition Tile and Rubber Flooring
- Resilient and Mineral Floorings
- Hospitals, Assisted Living, Institutions
- Processing Plants and Pharmaceutical
- Transportation: Trains, Buses & Planes
- Education, Hospitality Industry
- Commercial and Industrial properties
Product Characteristics
Appearance and Color: Clear liquid
Flash Point: Non-flammable
Diluted VOC:
8 oz GCR 1 to 1 gallon water: 25 g/l
32 oz GCR 1 to 1 gallon water: 100 g/l
Shelf Life: 18 months, unopened when properly stored. Re-inspect after 1 year.
Storage: 45°F-70°F. Keep from freezing or prolonged exposure to sunlight and heat. Keep closed during storage.
Equipment Needed: Non-shed mop, floor scrubbing machine, wet vacuum.
Product System Options / Compatibility
Vinyl Tile or Sheeting:
GCR 1 Floor Stripper
GCR 3 Clear Top Coat
Vinyl Tile, Sheeting, VAT:
GCR 1 Floor Stripper
GCR 2 Base Coat
Rubber Flooring & Base:
GCR 1 Floor Stripper
GCR 3 Clear Top Coat
Packaging Information
| Unit Size | Case Quantity | Case Weight |
|---|---|---|
| 1 Gallon Jug | 4 per case | 36 lbs / case |
| 5 Gallon Pail | not boxed | 45 lbs / case |
| 55 Gallon Drum | n/a | 500 pounds |
Physical Properties
Free Acid: Less than .50% when tested in accordance with ASTM D460.
pH Value (undiluted): 11.5
Ammonia Content: Less than 3% as NH3 by weight when tested in accordance with ASTM D 500.
Viscosity: No greater than “H” at 25°C when compared to the Gardner Bubble Viscometer Standards in accordance with ASTM D 1545.
Solubility: Completely soluble in distilled water.
Rinsing Properties: Free rinsing when tested as specified in ASTM D 3494, except use 100 ml rinses of hard water (300 ppm CaCO3 and use manufacturer’s dilution).
Floor Finish Removal Efficiency: Tested in accordance with ASTM D 1792, except pre-soak the test tiles in the diluted stripper for 15 minutes immediately prior to scrubbing.
Theoretical Coverage Rates
Coverage rate is dependent on application method and substrate. Below value is for estimation purposes only. Testing should be completed for accurate figures:
200 square feet
(per gallon, per coat)
Contact Information
For further technical questions, current information, MSDS, or other questions, please contact:
GENESIS COATINGS, INC. (800) 533-4273